THF172232

 

Fit for the pope, perfect for a parade!

Ford Motor Company was approached by the Vatican in 1965 to provide a vehicle in which to transport Pope Paul VI during a visit to New York City that October. It was an unprecedented occasion—no sitting pope had ever visited the United States before—and Ford was determined to meet the challenge. The automaker approached George Lehmann and Bob Peterson of Chicago. The two men had specialized in “stretching” and customizing Lincoln Continentals since 1962, and their firm had earned a reputation for the high quality of its work. Lehmann-Peterson did not disappoint, rushing a special car to completion in fewer than two weeks.

The papal Lincoln was lengthened to 21 feet (from the standard 18). Step plates and handrails were added for security personnel. Additional seats, arranged in a vis-à-vis (i.e., face-to-face) layout, were placed in the rear compartment. Supplemental interior lighting and a public address system allowed the pontiff to be seen and heard by the crowds, and an adjustable seat—capable of being raised several inches—further improved his visibility. A removable roof panel and added windscreen allowed the pope to stand and wave when conditions permitted.


Pope Paul VI Pictured Visiting New York in 1965 / THF128756

Pope Paul VI spent a whirlwind 14 hours touring New York on October 4, 1965. He gave a blessing at St. Patrick’s Cathedral, met with President Lyndon Johnson at the Waldorf Astoria hotel, addressed the UN General Assembly, and led an outdoor mass at Yankee Stadium. The pontiff ended his tour with a visit to the Vatican exhibit at the New York World’s Fair.

The modified Lincoln returned to Chicago where it served as a city parade car for visiting dignitaries. In 1968, the Vatican called once again, this time requesting the car’s use during a papal visit to Bogotá, Colombia. The car again performed flawlessly, despite Bogotá’s high altitude and the engine modifications made to the vehicle as a result.


Apollo 13 Astronauts Jack Swigert and Jim Lovell in a Parade, Chicago, Illinois, May 1, 1970 / THF288386

The car went back to Chicago and soon carried a new series of dignitaries. Apollo 8 astronauts Frank Borman, Jim Lovell, and William Anders—the first men to orbit the Moon—were paraded in the car on a visit to the Windy City in January 1969. Seven months later, Apollo 11 astronauts Neil Armstrong, Buzz Aldrin, and Michael Collins enjoyed a similar honor. The crews of Apollo 13 and Apollo 15 would later have their own parades in the Lincoln.

Continue Reading

Illinois, New York, 20th century, 1960s, space, popular culture, limousines, Ford Motor Company, convertibles, cars, by Matt Anderson

THF90487

The 1943 Willys-Overland Jeep above, currently on exhibit in Driving America in Henry Ford Museum, represents the millions of vehicles, aircraft, and military items produced by American automakers during World War II. With many men fighting overseas, women joined the workforce in unprecedented numbers. Ford’s Willow Run plant, which produced B-24 bomber airplanes, showed just how important these women were to America’s war effort.


The character “Rosie the Riveter” is celebrated in this sheet music from 1942. / THF290068

More than 42,000 people worked at Willow Run. Approximately one-third were women. Riveting was an essential craft there—each B-24 had more than 300,000 rivets. The skilled women who accomplished this work at Willow Run and elsewhere inspired the symbolic character “Rosie the Riveter.” Women also served in clerical and support staff positions at the plant. Women and men earned the same pay for the same work.


Real-life Rosies rivet B-24 tail cones at Ford’s Willow Run Bomber Plant, June 1944 / THF272701

Willow Run produced 8,685 B-24 bombers. The plant captured the public’s imagination, with Rosie the Riveter appearing on government-sponsored posters and magazine ads, encouraging more women to join the war production effort. Rosies built plenty of Jeeps, too. Willys-Overland manufactured 380,000 of them, and women and men at Ford built another 279,000 Jeeps, identical to the Willys models, at six plants across the country.


Ford Motor Company humble-bragged about its wartime production, including Jeeps, tanks, B-24 bombers, and more, in this 1943 ad. / THF93700

Altogether, the women and men who worked in American automotive plants during World War II built 4 million engines, 2.8 million tanks and trucks, and 27,000 aircraft—fully one-fifth of the country’s military materials. Many women came to enjoy the independence and economic freedom provided by their jobs. But, when men returned at war’s end, the same government that called women to the factories now encouraged them to go back to working in the home, so men could reclaim factory jobs.

The women who labored in wartime factories were essential to America’s Arsenal of Democracy. They made Rosie the Riveter into an enduring feminist icon—and a powerful symbol of women’s contributions to the American economy.

This post was adapted from a stop on our forthcoming “Hidden Stories of Manufacturing” tour of Henry Ford Museum of American Innovation in the THF Connect app, written by Matt Anderson, Curator of Transportation at The Henry Ford. To learn more about or download the THF Connect app, click here.

Additional Readings:

• Driving America
  
• 1981 Checker Marathon Taxicab
  
• The Henry Ford’s Tollbooths and the Cost of Good Roads
  
• 1955 Chevrolet Bel Air Hardtop

Michigan, airplanes, Driving America, THF Connect app, by Matt Anderson, Ford workers, Ford Motor Company, women's history, World War II, Henry Ford Museum

Mose Nowland, with wife Marcia and daughter Suzanne, at The Henry Ford in June 2021.

The Henry Ford lost a dear friend and a treasured colleague on August 13, 2021, with the passing of Mose Nowland. When he joined our Conservation Department as a volunteer in 2012, Mose had just concluded a magnificent 57-year career with Ford Motor Company—most of it in the company’s racing program—and he was eager for something to keep himself occupied in retirement. We soon discovered that “retire” was just about the only thing that Mose didn’t know how to do.

To fans of Ford Performance, Mose was a legendary figure. He joined the Blue Oval in 1955 and, after a brief pause for military service, he spent most of the next six decades building racing engines. Mose led work on the double overhead cam V-8 that powered Jim Clark to his Indianapolis 500 win with the 1965 Lotus-Ford. Mose was on the team behind the big 427 V-8 that gave Ford its historic wins over Ferrari at Le Mans—first with the GT40 Mark II in 1966 and then again with the Mark IV in 1967. And Mose was there in the 1980s when Ford returned to NASCAR and earned checkered flags and championships with top drivers like Davey Allison and Bill Elliott.


Mose with one of his creations during Ford’s Total Performance heyday.

Following his retirement, Mose transitioned gracefully into the role of elder statesman, becoming one of the last remaining participants from Ford’s glory years in the “Total Performance” 1960s. Museums and private collectors sought him out with questions on engines and cars from that era, and he was always happy to share advice and insight. Mose’s expertise was exceeded only by his modesty. He never claimed any personal credit for Ford’s racing triumphs—he was just proud to have been part of a team that made motorsport history. Mose was able to see that history reach a wider audience with the success of the recent movie Ford v Ferrari.

Continue Reading

Michigan, Dearborn, The Henry Ford staff, 21st century, 20th century, racing, race cars, philanthropy, Old Car Festival, Model Ts, Mark IV, making, in memoriam, Henry Ford Museum, Greenfield Village, Ford workers, Ford Motor Company, engines, engineering, collections care, cars, by Matt Anderson, #Behind The Scenes @ The Henry Ford

Baldwin "Consolidation" Steam Locomotive, 1909 / THF91583

Locomotives like the 1909 Baldwin “Consolidation” Steam Locomotive, currently on exhibit in Henry Ford Museum of American Innovation, were designed to haul heavy freight trains at relatively slow speeds: a perfect example of the kind of anonymous motive power designed to haul apparently unremarkable material. This example was built for the Bessemer and Lake Erie (B&LE), an Andrew Carnegie–owned railroad connecting the port of Conneaut, Ohio, on Lake Erie with Bessemer on the outskirts of Pittsburgh, Pennsylvania. Traffic on the B&LE consisted almost exclusively of southbound iron ore trains and northbound coal trains—a great example of an apparently modest connector railroad playing a limited but utterly crucial role in a nationally important heavy industry.

The B&LE locomotive used a 2-8-0 wheel arrangement—two pilot wheels and eight driving wheels, but no trailing wheels under the cab. One of the first locomotives of this type was ordered in 1866 by Pennsylvania’s Lehigh and Mahony Railroad and named Consolidation. In time, that engine’s formal name came to describe any steam locomotive of the 2-8-0 design.

Visually, the B&LE locomotive stands in stark contrast to the “Sam Hill,” just 50 years its senior: no pinstriping to refresh, no bright paintwork to keep clean, no brass to keep polished—in fact, no superfluous details whatsoever. This is practical, brute technology designed for a single purpose, maintenance kept to fundamentals, and aesthetics of no account whatsoever. While its technological origins lie in the confident improvisations of the 19th century, the overall design of locomotives in this period was increasingly informed by a better understanding of scientific principles.


This post is adapted (with additional new material by Matt Anderson, Curator of Transportation at The Henry Ford) from an educational document from The Henry Ford titled “Transportation: Past, Present, and Future—From the Curators.”

 

railroads, Henry Ford Museum, by Matt Anderson

Fair Lane, Henry and Clara Ford’s private railroad car. / THF80274

Fair Lane, the private Pullman railroad car built for and used by Henry and Clara Ford, turns 100 years old in 2021. It provides a fascinating window into business and pleasure travel for the wealthy in the early 20^th century.

By 1920, the Fords found it increasingly difficult to travel with any degree of privacy. Henry, in particular, was widely recognized by the public. He’d been generating major headlines for a decade, whether for his victory against the Selden Patent, his achievements with mass production and worker compensation via the Five Dollar Day, or his misguided attempt to end World War I with the Peace Ship. The Fords could travel privately for shorter distances by automobile, and their yacht, Sialia, provided seclusion when traveling by water. But anytime they entered a railroad station, the couple was sure to be pestered by the public and hounded by reporters. Their solution was to commission a private railroad car for longer overland trips.

Private railroad cars are nearly as old as the railroad itself. America’s first common-carrier railroad, the Baltimore & Ohio, opened in 1830. Little more than ten years later, President John Tyler traveled by private railcar over the Camden & Amboy Railroad to dedicate Boston’s Bunker Hill Monument in 1843. Not surprisingly, railroad executives and officials were also early users of private railroad cars. Cornelius Vanderbilt, president of the New York Central Railroad, used a private car when traveling over his line, both for business and for pleasure. For a busy railroad manager, the private railcar served as a mobile workspace where business could be conducted at distant points on the railroad line, far from company headquarters.


Pullman cars on the First Transcontinental Railroad, circa 1870. / THF291330

Following the Civil War, the Pullman Palace Car Company earned a reputation for its opulent public passenger cars with comfortable sleeping accommodations. Company founder George Pullman designed a private railcar to similar high standards. Pullman named the car P.P.C.—his company’s initials—and used it when traveling with his family. Pullman enjoyed lending the car to other dignitaries, by which he could simultaneously impress VIP passengers and advertise his company. Eventually, Pullman began renting the car out to patrons who could afford the daily rate of $85 (more than $2,000 today).

Clara and Henry Ford ordered their private railroad car from the Pullman Company on February 18, 1920. They hoped to have it delivered by that September, for a planned trip to inspect properties Henry had recently purchased in Michigan’s Upper Peninsula. But delays pushed the car’s actual delivery date back by about nine months. Some of those delays were due to changes to the car’s interior. Clara designed the interior spaces, working with Sidney Houghton of London, who had earlier provided the same service for the Fords’ yacht.

The finished railroad car was delivered on June 23, 1921. The Fords named it Fair Lane—the same name they’d given to their estate in Dearborn, Michigan. (Fair Lane was the area in County Cork, Ireland, where Mr. Ford’s grandfather was born.) The final bill for the railcar came to $159,000 (about $2.3 million today). The Fords paid 25 percent of that cost upon placing their order, a further 25 percent during construction, and the final 50 percent on delivery.

Surely the finished Fair Lane was worth the wait and expense. The car included accommodations for six passengers and sleeping quarters for two additional staff members. When traveling, Fair Lane typically was staffed by a porter to attend to the passengers’ needs and a cook to prepare meals.


Fair Lane’s lounge offered the best views of passing scenery. / THF186264

At the rear of the car, a comfortable lounge provided a spot to read, relax, or simply watch the passing scenery through the large windows. An open porch-like platform at the very rear of the car was particularly enjoyable at moderate train speeds. Typically, Fair Lane was coupled to the end of a train, meaning that the view from the platform would not be obstructed.


Bedrooms in Fair Lane were cozy but comfortable. / THF186273

From the lounge, a narrow hallway ran most of the car’s length. Four bedrooms were located along the corridor. These rooms were cozy but comfortable. Each room had a bed, but berths could be unfolded from above to provide additional sleeping space if needed. Dressers and small desks rounded out the furnishings. Likewise, the bathrooms in Fair Lane were small but serviceable. Each one had hot and cold running water and a toilet. The master bath also included a shower.


Fair Lane’s passengers dined in this area. An on-board cook prepared meals to order. / THF186285

The dining area, near the front of the car, featured an extension table that comfortably seated six adults at one time. The chandelier, which hung directly above the table, was secured with guys that kept it from swaying as the car rolled down the railroad track. Built-in cabinets housed the car’s glassware and china. Clara Ford stocked Fair Lane with 144 various glasses, 169 pieces of silverware, and 230 crockery items. Wood posts and rails kept things from sliding around or falling out of the cabinets.


The car’s kitchen was small but sufficient for elaborate meals. / THF186289

Logically, the kitchen was located just in front of the dining room. Finished in stainless steel, the kitchen included an oven, a stovetop, a sink, and numerous additional cabinets. Food and supplies were loaded through the door at the car’s front end, so as not to disturb the riders farther back in the car. Staff quarters were located in the front of the car too. Compared with the other bedrooms, the staff room was sparse and utilitarian.

Using Fair Lane was not like driving a limousine or flying a private airplane. The railcar’s travels had to be coordinated with the various host railroads that operated America’s 250,000-mile rail network. Usually, Fair Lane was coupled to a regularly scheduled passenger train. The fee for pulling the private car was equivalent to 25 standard passenger tickets. One standard ticket on a train from Detroit to New York City in the early 1920s cost around $30, meaning the Fair Lane fee worked out to about $750 (around $10,000 today). If Fair Lane required a special movement—that is, if it was moved with a dedicated locomotive and not as a part of a regular train—then the fee jumped to the equivalent of 125 standard tickets.

The fee structure was different when Fair Lane moved over the Detroit, Toledo & Ironton Railroad. Henry Ford personally owned DT&I from 1920 to 1929. It was considered official railroad business when Mr. Ford used his private car on DT&I, so he did not need to pay a fare for himself. But he did pay fares for Fair Lane passengers who weren’t directly employed by DT&I.


Edsel and Eleanor Ford, Henry and Clara Ford, and Mina and Thomas Edison pose on the car’s rear platform about 1923. / THF97966

The Fords made more than 400 trips with Fair Lane in the two decades that they owned the car. Annual excursions took Henry and Clara Ford to their winter homes in Fort Myers, Florida, or Richmond Hill, Georgia. Likewise, Edsel and Eleanor Ford, Henry and Clara’s son and daughter-in-law, occasionally used Fair Lane to visit their own vacation home in Seal Harbor, Maine. The Fords hosted several special guests on the car too. Presidents Warren Harding and Calvin Coolidge both spent time on the car, as did entertainer and humorist Will Rogers. Not surprisingly, Thomas and Mina Edison—among Henry and Clara Ford’s closest friends—also traveled aboard Fair Lane.

Clara Ford enjoyed trips to New York City, where she could visit friends or patronize specialty boutiques and department stores. Fair Lane could be coupled to direct Detroit–New York trains like New York Central’s Wolverine or Detroiter. Both trains arrived at the famous Grand Central Terminal in the heart of Manhattan. In 1922, an overnight run from the Motor City to the Big Apple on the Wolverine took 16 hours.

Both Henry Ford and Edsel Ford used Fair Lane when traveling on Ford Motor Company business. Chicago, New York, Boston, and Washington, D.C., were all frequent destinations on these trips. Of course, they’d travel to distant Ford Motor Company properties too, including those previously mentioned holdings in Michigan’s Upper Peninsula.


Detroit’s Michigan Central Station, where most of Fair Lane’s journeys began and ended. / THF137923

Most of the car’s trips started and ended at Detroit’s Michigan Central Station, ten miles east of Dearborn. The large station had facilities to clean and stock Fair Lane, and crews to switch the car onto regular passenger trains. Michigan Central was a New York Central subsidiary, and New York Central trains provided direct service from Detroit to Chicago, New York, Boston, and many places in between. For longer trips, New York Central coordinated with additional railroad lines to transfer Fair Lane to other trains at connecting points, making the trip as seamless as possible for the Fords.

When Fair Lane wasn’t traveling out on a railroad, the car was stored in a shed built for it near Henry Ford’s flour mill on Oakwood Boulevard in Dearborn. The shed was just west of Dearborn’s present John D. Dingell Transit Center, where Amtrak trains stop today.

The Fords considered updating or replacing Fair Lane at different times. As early as March 1923, Ernest Liebold, Henry Ford’s personal secretary, wrote to the Pullman Company to inquire about building a larger car surpassing Fair Lane’s 82-foot length. Whatever Pullman’s reply, Ford did not place a new order. Twelve years later, Edsel Ford wrote to Pullman to ask about adding air conditioning to Fair Lane. The company responded with an estimate of $12,000 for the upgrade. Apparently, the cost was high enough for the Fords to once again consider building an entirely new, larger private railcar. The Pullman Company prepared a set of drawings for review but, once again, no order was placed.


Fair Lane in November 1942, at the end of its time with the Fords. / THF148020

By the early 1940s, Fair Lane was aging and in need of either significant repairs or outright replacement. Henry and Clara Ford were aging too, and weren’t traveling quite as much as they had in earlier years. On top of this, the United States joined World War II following the attack on Pearl Harbor in December 1941. Wartime brought with it restrictions on materials, manufacturing, and travel—each on its own enough to sidetrack further work on Fair Lane. Somewhat reluctantly, Henry and Clara Ford sold their private railroad car in November 1942.

The St. Louis Southwestern Railway purchased Fair Lane from the Fords for $25,000. The company used the car for railroad business, carrying executives on its lines concentrated in Arkansas and Texas. In 1972, St. Louis Southwestern donated Fair Lane to the Cherokee National Historical Society. The organization used the car as an office space for the Cherokee Nation in Tahlequah, Oklahoma.

Richard and Linda Kughn purchased Fair Lane in 1982. They moved it to Tucson, Arizona, and began a four-year project to restore the car to its original Ford-era appearance. At the same time, they updated Fair Lane with modern mechanical, electrical, and climate-control systems. The Kughns enjoyed the refurbished railcar for several years before gifting it to The Henry Ford in 1996. Today Fair Lane is back in Dearborn—a testament to the golden age of railroad travel, as experienced by those with gilded budgets.


Matt Anderson is Curator of Transportation at The Henry Ford.

Additional Readings:

• 1924 Railroad Refrigerator Car, Used by Fruit Growers Express
  
• Ingersoll-Rand Number 90 Diesel-Electric Locomotive, 1926
  
• Allegheny Locomotive: Can-Do Experience
  
• Revolution on Rails: Refrigerated Box Cars

21st century, 20th century, travel, railroads, Michigan, Henry Ford Museum, Henry Ford, Fair Lane railcar, Detroit, Dearborn, Clara Ford, by Matt Anderson

THF97674

In 1913, Ford Motor Company combined the standardization of interchangeable parts with the subdivision of labor and the fluid movement of work to workers to create the world’s most influential assembly line. We are unusually fortunate that two keen observers of industry, Horace Lucien Arnold and Fay Leone Faurote, were there to document it.

Arnold, a correspondent for The Engineering Magazine, grasped the significance in Ford’s work and began a series of articles on the company’s Highland Park factory. After Arnold’s untimely death, Faurote completed and compiled the articles in the 1915 study Ford Methods and the Ford Shops. The book’s detailed descriptions, numerous photographs and careful diagrams give us a vivid window into Highland Park at a seminal moment in manufacturing history.

Looking back now, the most remarkable aspect of Ford Methods and the Ford Shops is the liberal level of access Ford gave to its authors. It is difficult to imagine Google or Apple opening their doors to today’s press and giving unfettered access to employees, workspaces, and sensitive production figures. The company’s cooperation speaks volumes about Henry Ford’s confidence in Highland Park. He knew that his methods were far ahead of his competitors, and there was little fear of them catching up too quickly.


Workers place magnets on Model T flywheels, 1913. Fittingly, successful experiments with a moving magneto assembly line “sparked” Ford’s adoption of assembly line techniques throughout Highland Park. / THF96001

The assembly line came to Ford Motor Company in stages. Around April 1, 1913, flywheel magnetos were placed on moving lines. Instead of one worker completing one flywheel in some 20 minutes, a group of workers stood along a waist-high platform. Each worker assembled some small piece of the flywheel and then slid it along to the next person. One whole flywheel came off the line every 13 minutes. With further tweaking, the assembly line produced a finished flywheel magneto in just five minutes.


Flow charts and maps in the book illustrated the logical, sequential arrangement of machine tools at Highland Park. / THF600582

It was a genuine “eureka” moment. Ford soon adapted the assembly line to engines, and then transmissions, and, in August 1913, to complete chassis. The crude “slide” method was replaced with chain-driven delivery systems that not only reduced handling but also regulated work speed. By early 1914, the various separate production lines had fused into three continuous lines able to churn out a finished Model T every 93 minutes—an extraordinary improvement over 12½ hours per car under the old stationary assembly methods.


Workers lower an engine into a Model T chassis, 1913. Note that the line is not yet chain-driven. Ford constantly improved the assembly line in search of time and cost savings. / THF91696

The incredible time and cost savings realized through the assembly line allowed Henry Ford to lower the Model T’s price, which increased demand for the car, which then prompted Ford to seek even greater manufacturing efficiencies. This feedback loop ultimately produced some 15 million Model Ts selling for as little as $260 each.

The peak annual Model T production of 1.8 million in 1923 was still years away when Arnold and Faurote made their study. They did not capture Ford’s assembly line in a fully realized form. In fact, the line never was finished. It existed in a state of flux, under constant review for any potential improvements. Adjusting the height of a work platform might save a few seconds here, while moving a drill press might shave some more seconds there. Several such small changes could yield large productivity gains.

Ford Methods and the Ford Shops captures a manufacturer that has just discovered the formula for previously unimagined production levels. The assembly line is groundbreaking, and Ford knows it. The company’s openness with its methods, and Arnold’s and Faurote’s efforts to document and publicize them, helped make the Model T assembly line the industrial milestone that we still celebrate more than a century later.


Matt Anderson is Curator of Transportation at The Henry Ford. This post was adapted from a 2013 post in our Pic of the Month series.

Additional Readings:

• The Wool Carding Machine
  
• Positioning and Synchronicity on Paper
  
• Fordson Tractor No. 100,000
  
• Thomas Blanchard’s Wood Copying Lathe

research, Model Ts, cars, Ford Motor Company, manufacturing, by Matt Anderson, Henry Ford, books

We spotlighted racing at Motor Muster for 2021. This 1953 Oldsmobile 88 stock car, brought to us by the R.E. Olds Transportation Museum, fit the theme perfectly. / Image from The Henry Ford’s livestream

Gearheads and automobile aficionados had reason to celebrate as Motor Muster returned to Greenfield Village on June 19 and 20. Like so much else, last year’s show was canceled in the wake of COVID-19. But with restrictions eased and a brighter situation all around, we returned in 2021 for another memorable show. We also welcomed a new sponsor. For the first time, this year’s Motor Muster was powered by Hagerty.

It’s no surprise, given the recent opening of our exhibit Driven to Win: Racing in America Presented by General Motors, that our Motor Muster spotlight was on racing. Yes, we had competition cars in the mix, but we opened the celebration to include production cars inspired by racing events, locations, and personalities. Whether it’s a model like Bonneville or a make like Chevrolet, racing names have appeared on automobiles from the start.


The Henry Ford’s 1953 Ford Sunliner convertible, official pace car at that year’s Indianapolis 500. / Image by Matt Anderson

As always, we brought out a special vehicle from The Henry Ford’s collection. Many of our prominent competition cars are in Driven to Win, but we found a perfect match for the theme in our 1953 Ford Sunliner. The convertible served as pace car at the 1953 Indianapolis 500, driven by William Clay Ford in honor of Ford Motor Company’s 50^th anniversary. In addition to its decorative lettering (with flecks of real gold in the paint), the pace car featured a gold-toned interior, distinctive wire wheels, and a specially tuned V-8 engine rated at 125 horsepower.


From the GM Heritage Center, a 1955 Chevrolet from the days when stock cars were still largely stock. / Image by Matt Anderson

Our friends at General Motors got into the spirit of things by lending an appropriate car from the GM Heritage Center collection. Their 1955 Chevrolet 150 sedan is a replica of the car in which NASCAR driver Herb Thomas won the 1955 Southern 500 at Darlington Raceway. Thomas’s car benefited from Chevy’s new-for-’55 V-8 engine which, with the optional PowerPak dual exhausts, was rated at 180 horsepower. The Chevy small-block design went on to win more NASCAR races than any other engine.

Historical vignettes were in place throughout Greenfield Village—everything from a Civilian Conservation Corps setup from the 1930s to a patriotic bicentennial picnic right out of the mid-1970s. Even the Herschell-Spillman Carousel got into the spirit of the ’70s, playing band organ arrangements of the hits of ABBA. (I wonder if that 1961 Volvo at the show ever drove past the carousel. What a smorgasbord of Swedish splendor that would’ve been!)


Our awards ceremony included prizes for unrestored cars, like this 1941 Ford Super Deluxe Fordor. / Image by Matt Anderson

As always, we capped the weekend with our awards ceremony. Our popular choice voting allows visitors to choose their favorite vehicles from each Motor Muster decade. Top prize winners this year included a 1936 Hupmobile, a 1948 MG TC, a 1958 Chevrolet Corvette, a 1969 Plymouth Barracuda, and a 1976 Ford Econoline van. The blue ribbon for motorcycles went to a 1958 Vespa Allstate, and the one for bicycles to a 1952 JC Higgins bike. For commercial and military vehicles, our top vote-getters were a 1937 Ford 77 pickup and a 1942 White M2A1 half-track, respectively. We also presented trophies to two unrestored vehicles honored with our Curator’s Choice award. For 2021, those prizes went to a 1936 Buick Victoria Coupe and a 1967 Chevrolet C/10 pickup.

It was a longer-than-usual time in coming, but Motor Muster 2021 was worth the wait. Everyone was in good spirits and enjoying the cars, the camaraderie, and the chance to enjoy a bit of normalcy after a trying year. Let’s all do it again soon.

If you weren’t able to join us at Motor Muster this year, though, you can watch parts of the program right now. Our popular pass-in-review program, in which automotive historians provide commentary on participating vehicles, returned this year with a twist. We livestreamed portions of the program so that people who couldn’t attend Motor Muster in person could still enjoy some of the show. Enjoy those streams below, or use the links in the captions to jump straight to Facebook.

Continue Reading

Michigan, Dearborn, 21st century, 2020s, racing, race cars, Motor Muster, Greenfield Village, events, cars, by Matt Anderson

The Columbus Buggy Company’s sprawling factory, depicted as it was in 1889. / THF124829

When we hear the name “Firestone,” our thoughts inevitably turn to motor vehicle tires, proving themselves where the rubber meets the road. It’s a bit surprising, then, to learn that members of the Firestone family were building horse-drawn vehicles decades before the first Model T turned a wheel.

Clinton Firestone, in partnership with the brothers George and Oscar Peters, established the Columbus Buggy Company in Columbus, Ohio, in 1875. The firm grew into one of the largest buggy manufacturers in the world. By 1900, it employed more than 1,000 people and operated branch offices throughout the United States.

Clinton Firestone was a first cousin to Benjamin Firestone. Benjamin was a prosperous farmer in Columbiana, Ohio, and the father to future tire magnate Harvey Firestone. (Greenfield Village visitors will recognize the brick farmhouse that Benjamin and Catherine Firestone called home.) After a stint selling patent medicines and flavor extracts, young Harvey went to work at his cousin Clinton’s buggy company in the early 1890s. Harvey Firestone bounced between bookkeeping and sales duties at branch offices in Columbus, Des Moines, and Detroit. He remained with the firm until 1896. Four years later, he established his own business selling rubber buggy tires—the famous Firestone Tire & Rubber.


Harvey Firestone, pictured here about 1920, worked at several Columbus Buggy Company branch offices throughout the Midwest. / THF124780

Working in sales, Harvey Firestone was a first-hand witness to one of the problems that led to Columbus Buggy’s demise. While the company offered well-built wagons priced around $100, a growing number of competitors, like Durant-Dort, offered similar-quality wagons for around $35. Some buyers continued to pay the premium for Columbus Buggy’s perceived prestige, but most were content to get a comparable vehicle elsewhere for one-third the price.

There was another problem too: the horseless carriage. Columbus Buggy tackled that challenge by introducing an automobile of its own in 1903. Despite a marvelous slogan—“A vehicle for the masses, not a toy for the classes”—the $750, ten-horsepower high-wheeler auto could not save the firm. Columbus Buggy Company went bankrupt in 1913.

Harvey Firestone, of course, did make a successful transition into the new motorized world. In 1906, Firestone Tire & Rubber secured its first contract to supply Ford Motor Company with automobile tires. That prosperous business relationship grew into a lifelong personal friendship between Harvey Firestone and Henry Ford.


The Henry Ford’s Columbus Buggy Company surrey.

In 2015, The Henry Ford acquired a beautifully-restored Model 300½ four-passenger surrey manufactured by Columbus Buggy. Open-sided surreys were a favorite warm-weather conveyance in the late 19^th and early 20^th centuries. (Ask anyone who’s seen Oklahoma!) Given the Columbus Buggy Company’s family ties, the surrey was an ideal fit for programming use at Firestone Farm in Greenfield Village. A surrey of this style and quality would have been within the means of an upper middle-class family like the Firestones—the sort of carriage they might have taken to church on Sunday, or to town on social calls.

Automobiles may have put the Columbus Buggy Company out of business, but we’re glad to keep a little part of its legacy rolling along.


Matt Anderson is Curator of Transportation at The Henry Ford.

20th century, 19th century, Ohio, horse drawn transport, Firestone family, entrepreneurship, by Matt Anderson

Driven to Win: Racing in America presented by General Motors.

The Henry Ford’s newest exhibition, Driven to Win: Racing in America presented by General Motors, opened to the public on March 27. It’s been a thrill to see visitors experiencing and enjoying the show after so many years of planning.

Along with all of that planning, we did some serious collecting as well. Visitors to Driven to Win will see more than 250 artifacts from all eras of American racing. Several of those pieces are newly acquired, specifically for the show.


Shoes worn by Ken Block in Gymkhana Five. Block co-founded DC Shoes in 1994. / THF179739

The most obvious new addition is the 2012 Ford Fiesta driven by Ken Block in Gymkhana Five: Ultimate Urban Playground; San Francisco. The car checked some important boxes for us. It represented one of America’s hottest current motorsport stars, of course, but it also gave us our first rally car. The Fiesta wasn’t just for show—Block drove it in multiple competitions, including the 2012 X Games in Los Angeles, where he took second place (one of five podium finishes Block took in the X Games series). At the same time, we collected several accessories worn by Block, including a helmet, a racing suit, gloves, sunglasses, and a pair of shoes. The footwear is by DC Shoes, the apparel company that Block co-founded with Damon Way in 1994.

Racing toys and games are prominently represented in Driven to Win. We have several vintage slot cars and die cast models, but I was excited to add a 1:64 scale model of Brittany Force’s 2019 Top Fuel car. Force is one of NHRA’s biggest current stars, and an inspiration to a new generation of fans.


Charmingly dated today, Pole Position’s graphics and gameplay were strikingly realistic in 1983. / THF176903

Many of those newer fans have lived their racing dreams through video games. We had a copy of Atari’s pioneering Indy 500 cartridge already, but I was determined to add newer, more influential titles to our holdings. While Indy 500 didn’t share much with its namesake race apart from the general premise of cars competing on an oval track, Atari’s Pole Position brought a new degree of realism to racing video games. Pole Position was a top arcade hit in 1982, and the home version, released the following year, retained the full-color landscapes that made the game so lifelike at the time. I was excited to acquire a copy that not only included the original box, but also a hype sticker reading “Arcade Hit of the Year!”

Another game that made the jump from arcade to living room was Daytona USA, released in 1995 for the short-lived Sega Saturn. Rather than open-wheel racing, Daytona USA based its gameplay on stock car competition. The arcade version was notable for permitting up to eight machines to be linked together, allowing multiple players to compete with one another.

More recently, the Forza series set a new standard for racing video games. The initial title, Forza Motorsport, featured more than 200 cars and encouraged people to customize their vehicles to improve performance or appearance. Online connectivity allowed Forza Motorsport players to compete with others not just in the same room, but around the world.

One of my favorite new acquisitions is a photograph showing a young racer, Basil “Jug” Menard, posing with his race car. There’s something charming in the way young Menard poses with his Ford, a big smile on his face and hands at his hips like a superhero. His car looks worse for the wear, with plenty of dents and an “85” rather hastily stenciled on the door, but this young driver is clearly proud of it. Menard represents the “weekend warrior” who works a regular job during the week, but takes on the world at the local dirt track each weekend.


When we talk about a racer’s tools, we don’t just mean cars and helmets. / THF167207

Drivers may get most of the glory, but they’re only the most visible part of the large team behind any race car. There are folks working for each win everywhere from pit lane to the business office. Engineers are a crucial part of that group, whether they work for the racing team itself, the car manufacturer, or a supplier. In the early 20^th century, Leo Goossen was among the most successful racing engineers in the United States. Alongside designer Harry Miller, Goossen developed cars and engines that won the Indianapolis 500 a total of 14 times from 1922 to 1938. We had the great fortune to acquire a set of drafting tools used by Goossen in his work. The donor of those tools grew up with Goossen as his neighbor. As a boy, the donor often talked about cars and racing with Goossen. The engineer passed the tools on to the boy as a gift.

We could not mount a serious exhibit on motorsport without talking about safety. Into the 1970s, auto racing was a frightfully dangerous enterprise. Legendary driver Mario Andretti commented on the risk in the early years of his career during our 2017 interview with him. Andretti recalled that during the drivers’ meeting at the beginning of each season, he’d look around the room and wonder who wouldn’t survive to the end of the year.

Improved helmets went a long way in reducing deaths and injuries. Open-face, hard-shell helmets were common on race tracks by the late 1950s, but it wasn’t until 1968 that driver Dan Gurney introduced the motocross-style full-face helmet to auto racing. Some drivers initially chided Gurney for being overly cautious—but they soon came to appreciate the protection from flying debris. Mr. Gurney kindly donated to us one of the full-face helmets he used in occasional races after his formal retirement from competitive driving in 1970.

And speaking of Dan Gurney, he famously co-drove the Ford Mark IV to victory with A.J. Foyt at Le Mans in 1967. We have a treasure trove of photographs from that race, and of course we have the Mark IV itself, but we recently added something particularly special: the trophy Ford Motor Company received for the victory. To our knowledge, Driven to Win marks the first time this trophy has been on public view in decades. Personally, I think the prize’s long absence is a key part of the story. Ford went to Le Mans to beat Ferrari. After doing so for a second time in 1967, Ford shut down its Le Mans program, having met its goal and made its point. All the racing world had marveled at those back-to-back wins—Ford didn’t need to show off a trophy to prove what it had done!


Janet Guthrie wore this glove at the 1977 Indy 500—when she became the first woman to compete in the Greatest Spectacle in Racing. / THF166385

For most of its history, professional auto racing has been dominated by white men. Women and people of color have fought discrimination and intimidation in the sport for decades. It is important to include those stories in Driven to Win—and in The Henry Ford’s collections. We documented Janet Guthrie’s groundbreaking run at the 1977 Indianapolis 500, when she became the first woman to compete in America’s most celebrated race, with a glove she wore during the event. I quite like the fact that the glove had been framed with a plaque, a gesture that underlined the significance of Guthrie’s achievement. We’ve displayed the glove in the exhibit still inside that frame. More recently, Danica Patrick followed Guthrie’s footsteps at Indy. Patrick also competed for several years in NASCAR, and in 2013 she became the first woman to earn the pole position at the Daytona 500. She kindly donated a pair of gloves that she wore in 2012, her inaugural Cup Series season.


Wendell Scott, the first Black driver to compete full-time in NASCAR’s Cup Series, as photographed at Charlotte Motor Speedway in 1974. / THF147632

Wendell Scott broke NASCAR’s color barrier when he battled discrimination from officials and fans to become the first Black driver to win a Cup Series race. Scott earned the victory at Speedway Park in Jacksonville, Florida, in December 1963. We acquired a photo of Scott taken later in his career, at the 1972 World 600. Scott retired in 1973 after sustaining serious injuries in a crash at Talladega Superspeedway. In addition to acquiring the photo, we were fortunate to be able to borrow a 1966 Ford Galaxie driven by Scott during the 1967 and 1968 NASCAR seasons.

Wendell Scott’s impact on the sport is still felt. Current star Darrell “Bubba” Wallace is the first Black driver since Scott to race in the Cup Series full-time. Following the murder of George Floyd on May 25, 2020, Wallace joined other athletes from all sports in supporting the Black Lives Matter movement. He and his teammates at Richard Petty Motorsports created a special Black Lives Matter paint scheme for Wallace’s #43 Chevrolet Camaro, driven at Virginia’s Martinsville Speedway on June 10, 2020. We acquired a model of that car for the exhibit. The interlocked Black and white hands on the hood are a hopeful symbol at a difficult time.

Our collecting efforts did not end when Driven to Win opened. We continue to add important pieces to our holdings—most recently, items used by rising star Armani Williams in his stock car racing career. There will be more to come: more artifacts to collect, more stories to share, and more insights on the people and places that make American racing special.


Matt Anderson is Curator of Transportation at The Henry Ford.

21st century, 20th century, women's history, video games, toys and games, racing, race cars, race car drivers, Henry Ford Museum, engineering, Driven to Win, by Matt Anderson, African American history, #Behind The Scenes @ The Henry Ford

Bobby Unser, 1963. / THF218272

The Henry Ford mourns the loss of Bobby Unser, who passed away on May 2, 2021. He was a good friend to our organization and, of course, one of America’s most accomplished racing drivers.

Bobby Unser was born into automobile racing. His father and uncles grew up in the shadow of Pikes Peak and competed in the legendary Pikes Peak Hill Climb race. Bobby’s uncle, Louie, earned nine victories in the contest from 1934 to 1953. Bobby’s father, Jerry, finished third as his personal best, but his sons would go on to dominate at Pikes Peak—and Indianapolis.

Bobby Unser was just one year old when his parents, Jerry and Mary, relocated the family from Colorado Springs, Colorado, to Albuquerque, New Mexico. Jerry opened a service station on Route 66—wisely locating it on the west side of town, so his station was the first one motorists saw after traveling across the New Mexico desert. Bobby and his brothers, Jerry Jr., Louis, and Al, grew up working in the station, living and breathing cars. Not surprisingly, they all caught the racing bug. Jerry Jr. and Louis each competed at Pikes Peak for the first time in 1955. Jerry Jr. won his class twice, in 1956 and 1957. He went on to compete in the 1958 Indianapolis 500, but died in a crash during qualifying for Indy the next year. Louis won his class at Pikes Peak in 1960 and 1961, but retired from competitive driving in 1964, when he developed multiple sclerosis. Al earned back-to-back Pikes Peak overall victories in 1964 and 1965. He made his Indy 500 debut in 1965 and went on to become only the second person to win the race four times, taking the checkered flag in 1970, 1971, 1978, and 1987.


Bobby Unser racing up Pikes Peak, 1960. / THF217906

Even in a family of racing legends, Bobby Unser stood out. Following service in the Air Force, he made his own debut at Pikes Peak in 1955. He earned the overall victory there the following year, kicking off an incredible run of nine overall wins in 13 years. Altogether, Bobby Unser claimed 10 overall victories and 13 class wins at Pikes Peak between 1956 and 1986. It’s no wonder they called him “King of the Mountain.”

Bobby followed his older brothers to Indianapolis in 1963. His first years at the Brickyard weren’t promising—crashes took him out early in the 1963 and 1964 races, and during qualifying in 1965—but he earned a top-ten finish in 1966. Two years later, Unser won his first victory at the Greatest Spectacle in Racing. Despite a challenge from Andy Granatelli’s turbine cars, and his own car getting stuck in high gear, Bobby finished nearly a lap ahead of second place finisher Dan Gurney.


Bobby Unser drinks the traditional bottle of milk following his first Indy 500 win, 1968. / THF140423

Unser and Gurney went from competitors to collaborators. Bobby joined Gurney’s All American Racers (AAR) as a driver and competed at Indy under the AAR banner through most of the 1970s. The capstone of their partnership came in 1975 when Unser once again became a reigning Indy 500 champion—or, more properly, a “raining” champion. Mother Nature put on the biggest show at the 1975 race. With 174 of the 200 laps down, the skies let loose with a torrential downpour. Visibility fell to nil, the track flooded, and cars spun left and right. Officials called the race early with Unser in the lead. The race may have been abbreviated, but it was enough to give Bobby his second win.

If Unser’s 1975 win was his most dramatic, then his third Indy 500 win, in 1981, was his most controversial. The final lap saw Bobby cross the finish line five seconds ahead of Mario Andretti. But Andretti and his teammates protested that Unser had passed cars illegally while under a caution flag earlier in the race. After a night of review and deliberation, race officials ruled in Andretti’s favor, penalizing Unser one position and giving Andretti the victory. Unser’s team appealed the ruling and, after months of further investigation, officials reinstated Bobby Unser’s win. The whole affair soured Unser’s love for racing, and he retired from IndyCar competition in 1983.


Bobby Unser in his sportscasting days, 1985. / THF222929

Thirteen wins at Pikes Peak, or three wins at the Indianapolis 500, would be enough to put any driver on a list of all-time greats, but Bobby Unser had more achievements still. He earned USAC national championships in 1968 and 1974, and an IROC championship in 1975. Following his retirement, Bobby worked in broadcasting, providing commentary on auto races for ABC, NBC and ESPN.

From the 1990s on, Bobby Unser was lauded by almost every imaginable racing heritage organization and hall of fame. In 2008, he gifted his personal papers to The Henry Ford, giving us a rich record of his career and accomplishments. He also kindly loaned us the family’s 1956 Ford F-100 pickup and the 1958 Moore/Unser car in which he won Pikes Peak seven times. Both vehicles debuted in our new exhibit, Driven to Win: Racing in America, presented by General Motors, just weeks ago.

We share the grief of racing fans everywhere at the loss of a true giant. At the same time, we celebrate Bobby Unser’s many achievements on and off the track, and we feel honored to have a role in preserving a significant part of his legacy.

 

• Hear Bobby Unser describe his career and accomplishments in his own words on our “Visionaries on Innovation” page here.
• Explore the Bobby Unser Papers, in the Benson Ford Research Center, through the finding aid here, and browse digitized photographs and other artifacts from the collection here.
• See highlights from The Henry Ford’s Bobby Unser Collection here.

Bobby Unser, 2009. / THF62889


Matt Anderson is Curator of Transportation at The Henry Ford.

Indy 500, Indiana, New Mexico, 21st century, 20th century, racing, race car drivers, in memoriam, Henry Ford Museum, Driven to Win, by Matt Anderson