Posts Tagged driving america
1949 Volkswagen
Horizontally opposed 4-cylinder engine, overhead valves, 69 cubic inches displacement, 30 horsepower
By American standards, almost everything about the Volkswagen was unconventional. That included the rear-mounted engine. Instead of a V-8 or an Inline-6, VW used a flat-4 “boxer” engine with horizontally opposed pistons and rods that looked a bit like prizefighters going at each other. The air-cooled motor was simple, efficient and highly adaptable, eventually powering everything from dune buggies to light airplanes.
Europe, 1940s, 20th century, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
1943 Willys-Overland Jeep
Inline 4-cylinder engine, L-head valves, 134 cubic inches displacement, 54 horsepower
Simplicity and ease of maintenance were important requirements when the Army put out the request to manufacturers that ultimately produced the Jeep. Willys-Overland’s 4-cylinder engine – nicknamed “Go Devil” – offered sufficient horsepower and an impressive 104 pound-feet of torque in a compact, reliable package. It was easy to service, too. The fuel filter, carburetor and air cleaner are all within easy reach under the hood.
Matt Anderson is the Curator of Transportation at The Henry Ford.
1940s, 20th century, World War II, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
Dozens of engines will be on view during Engines Exposed, but here Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites to kick off this annual exhibit.
1909 Ford Model T
Inline 4-cylinder engine, L-head valves, 177 cubic inches displacement, 22 horsepower
Early Model T engines circulated cooling water with a gear-driven pump, visible just behind this engine’s fan. After 2,500 units, Ford switched to a simpler – and less expensive – thermosiphon system dependent on natural convection. Model T never used an oil pump. The flywheel, spinning in an oil bath, simply splashed the lubricant around. The engine and transmission efficiently shared the same oil supply.
Engines Exposed, 20th century, 1900s, Model Ts, Henry Ford Museum, Ford Motor Company, engines, Driving America, cars
Our Bugatti Royale (Temporarily) Heads to California in 2017
Undoubtedly, our 1931 Bugatti Type 41 Royale is one of the most popular automobiles in The Henry Ford’s collection. Rarely off display, the Royale has been a fixture in Henry Ford Museum for decades. It’s rare to walk by the car and not see at least one person snapping a photo, studying the label, or simply daydreaming about what it’s like behind that big steering wheel. And why not? The Royale has everything going for it: beautiful styling, superb engineering, and a princely price tag – not to mention, as one of only six in the world, exceptional exclusivity.
Needless to say, it would take something very special for us to loan the Bugatti to another museum. Our friends at the Petersen Automotive Museum in Los Angeles have presented us with just such a reason. Last month, the Petersen opened an exciting new year-long exhibition, The Art of Bugatti. Automobile aficionados know the Bugatti name via the magnificent race and road cars built by Ettore Bugatti in the 1920s and 1930s. But Ettore was just one member of this remarkably artistic Italian-French family. Ettore’s father, Carlo Bugatti, designed exquisite furnishings. Ettore’s brother, Rembrandt, was a talented sculptor. (The elephant that sits atop our Royale’s radiator is based on a piece by Rembrandt Bugatti.) Ettore’s niece (and Rembrandt’s daughter), Lidia, was an accomplished artist.
The Bugatti Royale’s distinctive elephant mascot was cast from a sculpture by Rembrandt Bugatti, brother of Royale designer Ettore Bugatti.
Furniture, paintings, sculpture, silver and – of course – automobiles from each of these three Bugatti generations are featured in the Petersen’s show. The broad-ranging exhibit even reaches into the present day. Volkswagen, current owner of the Bugatti marque, has loaned a 2016 Bugatti Chiron to the show. The two-seat supercar, capable of an astounding 260 miles per hour, carries forward Ettore Bugatti’s tradition of elegance combined with performance.
Our Bugatti Royale will be away at the Petersen for five months. The car leaves Henry Ford Museum in mid-January 2017 and returns in mid-June. While it’s away, we’re going to fill the Bugatti’s place in Driving America with another special luxury car from our collection: J.P. Morgan, Jr.’s 1926 Rolls-Royce New Phantom Limousine. It’s been several years since the Rolls-Royce has been on view, so the loan provides a special opportunity for The Henry Ford’s visitors, too.
We are proud to be a part of this wonderful new Bugatti exhibition, and we encourage anyone visiting southern California between now and October 2017 to stop by the Petersen. It’s properly regarded as one of the world’s finest auto museums, and The Art of Bugatti only adds to that reputation.
Matt Anderson is Curator of Transportation at The Henry Ford.
convertibles, luxury cars, Henry Ford Museum, Driving America, cars, by Matt Anderson
The Cornell-Liberty Safety Car – space age and safety conscious. (THF90867)
We have our share of unusual-looking automobiles in Henry Ford Museum. The Tucker, the Belly Tank Lakester and the Comuta-Car all turn heads. But there’s only one that looks like it just flew in from the Spacely Space Sprockets factory: the 1957 Cornell-Liberty Safety Car. Behind that endearingly odd exterior, though, was a serious five-year effort to save lives by making American cars safer.
Over the first half of the 20th century, many automakers focused their efforts on making cars more reliable, more comfortable and more powerful. Safety was a lesser concern. There were exceptions – laminated windshield glass, which didn’t break into sharp pieces, was in use by the late 1920s – but conventional wisdom held that safety didn’t sell. Customers wanted their cars to be faster, not safer.
By the 1950s, that attitude began to change. Cars were certainly faster by then, but they also had roads to accommodate the higher speeds. State-built turnpikes and federally-funded Interstates had drivers zipping along at 75 miles per hour, and the booming postwar economy put more Americans behind the wheel each year. It’s little wonder that more drivers traveling at faster speeds led to a rise in accidents. By 1950, some 35,000 people were dying in auto accidents each year. Faculty members at Cornell University and officials at Liberty Mutual insurance took notice. In 1951, the two institutions teamed up to research a simple question: What causes injuries in automobile accidents?
Steering wheels and sharp edges could be lethal. (THF103543)
America’s highways became a laboratory, and police officers and emergency room doctors became research assistants. By carefully studying accident reports and medical records from around the country, the Cornell-Liberty team made several key discoveries. Car doors were a weak spot. Too often in an accident, a door was smashed open and one or more of the occupants was thrown from the vehicle. Furthermore, the team discovered that someone thrown from a car was more than twice as likely to receive serious injury. They learned that back seat passengers were three times safer than those in the front during a crash.
Researchers determined that the head was the most frequently injured part of the body, and that one in ten victims received a facial disfigurement. Contrary to popular belief at the time, the steering wheel provided no extra protection to the driver. Indeed, the wheel was often a cause of injury, being pushed into a driver’s chest during a crash. What’s more, control knobs, window frames and decorative ornaments often maimed accident victims.
Bucket seats cradle passengers while seat belts keep them secure. (THF90862)
The Cornell-Liberty team put its findings into practice by building a concept car that reduced or eliminated many of these dangers. Working from a 1956 Ford Fairlane, the team produced a car incorporating more than 60 protective features. In effect, they thought of their car like a giant egg carton designed to keep its fragile contents secure. The safety car’s accordion-style doors latched in three places, keeping them closed in a crash. Its bumper wrapped completely around the vehicle, protecting in low-speed accidents. Seat belts were prominent. Head restraints prevented whiplash injuries. The steering wheel and column were replaced by a pair of control handles. The dashboard, like other interior surfaces, was padded. Door handles were recessed. Unnecessary badges and baubles were removed.
The dashboard is uncluttered and the gauges are easy to read. (THF90865)
The best way to survive an accident is to avoid one, so the Cornell-Liberty team took driver visibility and distraction into account. The panoramic windshield – cleaned by five wipers – gave the driver an unobstructed view (as did the driver’s position, in the middle of the car rather than on the left side). Controls were kept to a minimum, and the oversized speedometer dial and gauges were placed directly below the driver’s sightline. The fuel gauge even had a “low level” indicator – something of a novelty in 1957. Indeed, the Cornell-Liberty team seemed to have anticipated every possible distraction; contemporary press reports noted that the offset front seats discouraged “necking while driving.”
Neither Cornell nor Liberty Mutual had any plans to manufacture or sell safety cars, of course. Instead, they hoped that their project would bring more attention to crash protection from the public and – more to the point – from automakers. A decade later, after some additional prodding from Ralph Nader and new government regulations, safety was an established priority in Detroit. And while the car you drive today may not have five windshield wipers or handlebar steering, it’s certainly got a bit of the 1957 Liberty-Cornell Safety Car inside.
Matt Anderson is Curator of Transportation at The Henry Ford.
research, Driving America, Henry Ford Museum, cars, by Matt Anderson
Since 1929, The Henry Ford has hosted a steady stream of celebrity visitors, eager to see our iconic artifacts. In 1961, French artist and iconoclast Marcel Duchamp and his wife visited Henry Ford Museum. If you know Duchamp’s history, you might find it an interesting contrast that the man who rejected art that was merely beautiful in favor of art “in the service of the mind” stopped to pose for this photo in front of the Bugatti. The large, luxurious, and beautiful car seems a far cry from “Fountain,” created by Duchamp more than four decades before. We’ve just digitized dozens of images featuring celebrities of all stripes visiting our campus over many decades—browse more by visiting this Expert Set we’ve created within our Digital Collections.
Ellice Engdahl is Digital Collections & Content Manager at The Henry Ford.
Michigan, Dearborn, 20th century, 1960s, luxury cars, Henry Ford Museum, Driving America, digital collections, convertibles, cars, by Ellice Engdahl, art
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 2002 Toyota Prius
Gasoline Engine: Inline 4-cylinder engine, double overhead cam, 91 cubic inches displacement, 76 horsepower
Electric Motor: AC, permanent magnet, 33 kilowatt, 44 horsepower
Hybrid cars are an old idea, but their moment arrived with the Toyota Prius. The car’s gas and electric power plants sit side-by-side. The electrical inverter, on top of the electric motor, converts DC current from the batteries into AC used by the motor. That motor becomes a generator during braking, turning kinetic energy from the car’s momentum into electricity fed back to the batteries.
electricity, hybrid cars, alternative fuel vehicles, Driving America, Henry Ford Museum, by Matt Anderson, Engines Exposed, engines
Engines Exposed: 1985 Mazda Wankel Rotary Engine
Two rotors, turbocharged, fuel-injected, 80 cubic inches displacement, 182 horsepower
This cutaway brings new meaning to “Engines Exposed!” Felix Wankel’s motor eliminated up-and-down pistons, developing its power directly in rotating motion. Fewer parts, less weight and a smaller package were advantages of the design. Imperfect seals, poor fuel economy and dirty emissions were drawbacks. Mazda put rotaries in several production models in the 1960s and 1970s, but the fuel-hungry Wankels are now largely relegated to performance vehicles.
Asia, 20th century, 1980s, Henry Ford Museum, Engines Exposed, engines, Driving America, cars
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1963 Chrysler Turbine
Regenerative gas turbine engine, 130 horsepower
Chrysler’s experimental turbine engine had 80 percent fewer moving parts than a piston engine, producing a very smooth ride. Regenerative turbines used gasses twice – once to drive the car and again to heat new air drawn into the system. Fuel flexibility was terrific (it ran on anything from gasoline to peanut oil) but fuel mileage (around 11.5 m.p.g.) wasn’t so hot.
1960s, 20th century, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1968 Mercury Cougar
V-8 cylinder engine, overhead valves, 390 cubic inches displacement, 335 horsepower
Unlike other pony cars, the upscale Cougar didn’t bother with 6-bangers. V-8 was the only available engine layout. This XR7-G model is equipped with Mercury’s 390-4V engine. The “V” is for Venturi, meaning that there’s a four-barrel carburetor under that air cleaner. And the “G” in the model name? That’s for Dan Gurney, who raced Cougars in Trans Am competition.
20th century, 1960s, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
