Posts Tagged henry ford museum
If you’ve visited the Fully Furnished exhibit in Henry Ford Museum in the last month or two, you might have noticed a new and perhaps surprisingly humble addition to the rest of the furniture. The distinctive burnt-orange-and-plaid 1961 chair (shown here) represents the first La-Z-Boy product to feature both a built-in ottoman and rocking functionality. The chair was just one of a number of chairs, other artifacts, and corporate archives donated to The Henry Ford Archive of American Innovation™ by La-Z-Boy in 2015, which in their totality tell compelling stories about the iterative development of comfortable seating, as well as product sales and marketing. Visit our online collections to peruse a number of these just-digitized materials, including (in addition to the chair on display) a telephone stand designed in 1928, a 1929 recliner, and “Jake,” a life-size mannequin used in testing ergonomics in the early 1980s.
Ellice Engdahl is Digital Collections & Content Manager at The Henry Ford.
digital collections, furnishings, Henry Ford Museum, by Ellice Engdahl
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1963 Chrysler Turbine
Regenerative gas turbine engine, 130 horsepower
Chrysler’s experimental turbine engine had 80 percent fewer moving parts than a piston engine, producing a very smooth ride. Regenerative turbines used gasses twice – once to drive the car and again to heat new air drawn into the system. Fuel flexibility was terrific (it ran on anything from gasoline to peanut oil) but fuel mileage (around 11.5 m.p.g.) wasn’t so hot.
1960s, 20th century, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1968 Mercury Cougar
V-8 cylinder engine, overhead valves, 390 cubic inches displacement, 335 horsepower
Unlike other pony cars, the upscale Cougar didn’t bother with 6-bangers. V-8 was the only available engine layout. This XR7-G model is equipped with Mercury’s 390-4V engine. The “V” is for Venturi, meaning that there’s a four-barrel carburetor under that air cleaner. And the “G” in the model name? That’s for Dan Gurney, who raced Cougars in Trans Am competition.
20th century, 1960s, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1960 Chevrolet Corvair
Horizontally opposed 6-cylinder engine, overhead valves, 140 cubic inches displacement, 80 horsepower
Chevrolet took the engine to a place it had rarely been in an American production car – the rear. Much of the motor is hidden by a metal shroud directing air flow from the deck louvers. There are two carburetors, one for each cylinder bank, connected to a single air cleaner at center. Later models increased trunk size up front by moving the spare tire to the engine compartment.
20th century, 1960s, Henry Ford Museum, events, Engines Exposed, engines, Driving America, Chevrolet, cars, by Matt Anderson
Museum Conservators don’t usually like stripping. But sometimes we need to do it.
I partially stripped a yellowed varnish from select areas of this fabulous table to restore a more period - appropriate contrast between the painted panels.
If you collect antiques or watch Antiques Roadshow on PBS, you already know that “original surfaces” are usually highly valued. Even when it is found in slightly damaged and worn condition, the original varnish on a piece of furniture may help prove the true age of a treasured antique.
However, what happens when the varnish has aged and yellowed, causing a color-shift in the object? This normal yellowing, which happens over time, may make the object hard to “read.” Continue Reading
Henry Ford Museum, furnishings, by Clara Deck, #Behind The Scenes @ The Henry Ford, collections care, conservation
When we look at an automobile, we are moved by what we see on the outside – its styling. But what moves the car is on the inside – its engine. Please join us for a rare look under the hoods of some of the finest automobiles at Henry Ford Museum. More than 40 cars have their engines exposed for you.
Here, Matt Anderson, Curator of Transportation at The Henry Ford, describes some of his favorites.
Engines Exposed: 1896 Ford Quadricycle
Inline 2-cylinder engine, F-head valves, 59 cubic inches displacement, 4 horsepower (estimate)
Henry Ford based the Quadricycle’s engine on the Kane-Pennington motor he saw in American Machinist magazine. Ford brazed water jackets around each of the two horizontal cylinders and mounted wooden water tanks on either side of his engine. The tanks ultimately were replaced with a smaller under-seat reservoir.
Driving America, cars, Henry Ford, Henry Ford Museum, Engines Exposed, quadricycle, engines
Fifty years ago today, brothers Bob and Bill Summers of Ontario, California, earned their place in the record books when Goldenrod, their four-engine streamlined über hot rod, averaged 409.277 miles per hour on the Bonneville Salt Flats. It would take 45 years for another non-supercharged, wheel-driven car to best their mark. Not bad for a couple of California dreamers working out of a vegetable stand.
Well, that’s not quite true. Oh, it’s true that their shop was in a converted vegetable stand, but the implication – that they were kids who got lucky – isn’t fair at all. The Summers brothers were Bonneville veterans, having built and raced a series of imaginative cars on the salt since 1954. And, while the brothers themselves were not wealthy, they had well-heeled corporate sponsors supporting Goldenrod. So no, this was no fly-by-night operation.
The early 1960s saw a revolution at Bonneville unlike anything since serious land speed racing started at the western Utah ancient lake bed in the 1930s. Drivers like Craig Breedlove in his celebrated Spirit of America hit 400, 500 and 600 miles per hour using jet power. These cars were more like airplanes without wings. There was no mechanical connection between the engine and the wheels – jet thrust literally pushed the car across the salt. Continue Reading
Utah, racing, race cars, race car drivers, making, Henry Ford Museum, Driven to Win, cars, California, by Matt Anderson, 20th century, 1960s
It is difficult, and a bit foolhardy, to identify any one car as being the most significant in the history of the American automobile industry. That said, the 1896 Duryea Runabout has a better claim to that title than most. It is the first series-produced automobile made in the United States. While just 13 copies were built, they were just that—identical copies as opposed to singular prototypes or custom orders. Only one of these pioneering vehicles survives today—and it is part of The Henry Ford’s collections.
Brothers Charles E. and J. Frank Duryea typified the mechanically-minded experimenters who built the first American automobiles. Charles entered the bicycle business in 1888, initially in St. Louis before moving to Peoria, Illinois, and then Washington, DC. The younger Frank joined his brother not long after graduating high school in 1888. The brothers were bitten by the auto bug after reading an 1889 article in Scientific American on the pioneering work done in Germany by Karl Benz. After relocating to Springfield, Massachusetts, the Duryea brothers set out to build their own automobile. Continue Reading
engineering, design, making, Henry Ford Museum, Driving America, cars, by Matt Anderson
The 1946 Lamy's diner, as it appears today in Henry Ford Museum. THF77241
Back before diners were considered revered icons of mid-20th-century American culture, Henry Ford Museum's acquisition of a dilapidated 1940s diner raised more than a few eyebrows. Was a diner, from such a recent era, significant enough to be in a museum?
Happily, times have changed. Diners have gained newfound respect and appreciation, as innovative and uniquely American eating establishments. A closer look at Lamy's diner reveals much about the role and significance of diners in 20th-century America. Continue Reading
Massachusetts, 1980s, 1940s, 20th century, restaurants, Henry Ford Museum, food, entrepreneurship, Driving America, diners, by Donna R. Braden
The Douglas DC-3 ranks with the Model T Ford and the Volkswagen Beetle as one of the great engineering designs of the twentieth century. The aircraft was safe, reliable, economical, and did more than any other single airplane to make commercial aviation a viable industry.
Ironically, the story of the DC-3 began with a famous airline crash. In 1931, a Fokker tri-motor operated by Transcontinental & Western Air (TWA) went down, killing all seven people on board, including famed University of Notre Dame football coach Knute Rockne. When an investigation of the crash revealed that the wood wing of the Fokker was weakened by rot, airlines began scrambling to replace wood-framed planes with all-metal ones. TWA asked several manufacturers for proposals for a new, all metal airplane, with two or three engines, weighing no more than 14,200 pounds, able to carry at least 12 passengers at 150 miles per hour, with a range of 1,080 miles. Douglas Aircraft, which had previously concentrated on military planes, proposed a twin-engine aircraft that they called the Douglas Commercial Number 1, or simply DC-1. TWA chose the Douglas design, but before it went into production an improved version was developed, called the DC-2. Continue Reading
California, 20th century, 1930s, travel, Heroes of the Sky, Henry Ford Museum, by Bob Casey, airplanes
