Past Forward

Activating The Henry Ford Archive of Innovation

Posts Tagged 20th century

turbine-engine

1963 Chrysler Turbine

Regenerative gas turbine engine, 130 horsepower.

turbine

Chrysler experimented with turbine engines for some 25 years. The Turbine could run on almost anything – gasoline, diesel, kerosene, even peanut oil (with exhaust that smelled like baking cookies)! While the fuel flexibility was terrific, the fuel economy was less than stellar. Chrysler ended the Turbine program in 1979. Note the huge air filter housing in front of the engine. The Turbine gulped about four times more air than a piston engine.

Matt Anderson is Curator of Transportation at The Henry Ford.

1960s, 20th century, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson

 

American type 4-4-0 locomotives, like the “Sam Hill,” are quintessential symbols of 19th century progress. THF.91567

 

Chances are that, when you hear the phrase “steam locomotive,” you picture an engine like the 4-4-0 “Sam Hill.” No technology symbolized 19th century America’s industrial and geographical growth better than the railroad, and no locomotive was more common than the 4-4-0.

In the 70 years from 1830 to 1900, rail lines grew from separate local routes connecting port cities with the interior to a dense and interconnected network that linked cities and towns across the continent. Likewise, locomotives grew from diminutive four-wheelers capable of five miles per hour to eight and ten-wheeled engines able to reach 100 miles per hour. But the 4-4-0 offered a special blend of performance and ability that made it particularly popular on American rails.

The 4-4-0 takes its name from the arrangement of its wheels. The four small leading wheels, located in front under the cylinders, help guide the locomotive through curves. The four large driving wheels, connected by rods to the cylinders, move the engine along the track. There are no (or zero) trailing wheels on a 4-4-0, but on larger locomotives trailing wheels help support the weight of the firebox. Continue Reading

20th century, Georgia, Michigan, 1850s, 19th century, railroads, Henry Ford Museum, by Matt Anderson

56-chevy-engine

1956 Chevrolet Bel Air

V-8 cylinder engine, overhead valves, 265 cubic inches displacement, 205 horsepower.

56-chevy

It’s the most enduring 8-cylinder American automobile engine. Chevrolet introduced its “small block” V-8 in 1955 – and kept on building it until 2003. Nearly every General Motors division used some variant, and total production is over 100 million, including later development generations. Not bad for an engine designed in 15 weeks. The compact unit is all but swallowed up by the Chevy’s engine bay. Note the relatively small-sized radiator, too. Efficient cooling was one of the small block’s many advantages.

Matt Anderson is Curator of Transportation at The Henry Ford.

20th century, 1950s, Henry Ford Museum, Engines Exposed, engines, Driving America, convertibles, Chevrolet, cars, by Matt Anderson

DOC112814-11282014164919

In reference work you never know where your search might lead you. Simply looking for information on Fordson tractors for a patron one day, I came across some amazing photos of women riding, repairing, and learning about tractors and I wondered what the story was behind these photos. So, armed with subject information gathered from our collection database EMu, I dug into our archival holdings of publications, articles of association, and corporate papers to see what I could find out about these Land Girls of Boreham.

In 1930, Henry Ford was traversing the English countryside by train, when one morning, as he, Clara, and Lord Perry stopped to breakfast, he noticed an old estate near Chelmsford, Essex.  Taking a keen interest in the land and buildings, he bought Boreham House and the 2,000 acres of land surrounding it. Things being in a dilapidated condition, he immediately set about to fix the place up in characteristic Ford fashion, bringing it into usable condition, fixing houses, and making the land profitable once again. Continue Reading

20th century, 1940s, 1930s, Europe, World War II, women's history, research, farms and farming, farming equipment, engineering, education, by Kathy Makas, agriculture

African American community parade celebrating Emancipation Day in Richmond, Virginia, on April 3, 1905. (P.DPC.018421/THF118868)

This lively scene from 1905 documents African Americans proudly parading through the streets of Richmond, Virginia, in celebration of Emancipation Day. The well-dressed marchers include many elders who were formerly enslaved, as well as many of their children and grandchildren born after the end of slavery. In 1905, forty years after the American Civil War ended, this life-changing event—Emancipation—continued to have deep, emotional meaning for African Americans.

During the height of the Civil War, President Abraham Lincoln signed the Emancipation Proclamation to take effect on January 1, 1863. This Executive Order, aimed at the secessionist states of the fledgling Confederate States of America, declared their slaves to be free. (However, this proclamation did not include all enslaved people—slaves were not freed in slave states that had remained loyal to the Union. In December 1865, the 13th Amendment completed Emancipation by declaring slavery illegal everywhere in the United States.) Continue Reading

19th century, 1860s, 20th century, 1900s, Virginia, photographs, Civil War, by Cynthia Read Miller, African American history

omni2

1978 Dodge Omni

Inline 4-cylinder engine, overhead valves, 105 cubic inches displacement, 75 horsepower.

omni

Small cars pack a lot into tight spaces. The Omni makes the most of its engine bay by mounting the unit transversely, with the crankshaft parallel to the front bumper. It’s a layout not widely used in American cars since the early 1900s, but particularly well-suited to compact front-wheel drive vehicles. Power is sent to the Omni’s front wheels via the transaxle, a combination gearbox-differential, on the driver’s side.

Matt Anderson is Curator of Transportation at The Henry Ford.

20th century, 1970s, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson

bugatti-2

1931 Bugatti Type 41 Royale

Inline 8-cylinder engine, single overhead camshaft, 779 cubic inches displacement, 300 horsepower.

bugatti

From its length, one might expect more than 8 cylinders under the Bugatti’s hood. But each of those cylinders displaces more than the whole of a Volkswagen Beetle’s power plant. Four air cleaners stand over the engine, fitted to the four carburetors installed by Charles Chayne after World War II. Two spark plugs protrude from each cylinder. The steering box sits just behind the right fender, in keeping with the car’s right-hand drive layout.

Matt Anderson is Curator of Transportation at The Henry Ford.

20th century, 1930s, luxury cars, Henry Ford Museum, events, Engines Exposed, Driving America, convertibles, cars, by Matt Anderson

Painting on Turtle Shell, Presented to Henry Ford, 1933.

Housed at The Henry Ford amidst many large and significant acquisitions is a small collection of quirky and one-of-a-kind items. Located mostly in storage, this group of artifacts is unofficially known as the Henry Ford Tributes. The objects range in size, materials and creation methods, but all have one thing in common – they were gifts given as tokens of gratitude and appreciation to a single man whose innovative ideas changed the lives of so many. Corporations, farm wives, Ford dealers, immigrants and civic institutions were all contributors to this eclectic group of gifts and commendations.

This collection has never been considered for a museum exhibit, but thanks to The Henry Ford’s digitization initiative, we were given the opportunity to highlight just a few in this unusual collection. For members of the Historical Resources team, this was a long-sought-after opportunity; many of us have our ‘favorites’, and as the project began in earnest, the suggestions came in at a rapid rate. It was hard to keep the online exhibit to just 76 objects! Continue Reading

20th century, making, Henry Ford, by Patrice Fisher, #Behind The Scenes @ The Henry Ford

00.1510.4.2

Henry Ford is sometimes referred to as a “folk hero”: he was such a prominent figure in public life during his day, and had such a significant impact on the entire world, that many people felt compelled to send him gifts to show their appreciation. Some of these are machine-made items, but many were laboriously hand-created.  We’ve just digitized some staff favorite tributes to Henry from our collection, including this 1935 diorama created in a gallon jug and featuring Henry Ford, Ford V-8 automobiles, young women, flags, flowers, and cotton chicks.  Check our blog later this week for a post from Collections Specialist Patrice Fisher highlighting more of these honorifics, or if you can’t wait, you can check out sets on our collections website related to love of Ford automobiles, likenesses of Henry Ford, and awards and trophies—or view all 70+ items.

Ellice Engdahl is Digital Collections & Content Manager at The Henry Ford.

20th century, Henry Ford, digital collections, by Ellice Engdahl

modelt1919

1919 Ford Model T

Inline 4-cylinder engine, L-head valves, 177 cubic inches displacement, 20 horsepower.

modelt1919-2

Mechanical simplicity was one of the secrets behind the Model T’s success. The engine has no fuel pump, relying on gravity to feed the carburetor. There is no water pump either, as a thermosyphon effect was used to circulate cooling water. The cylinder head removes in one piece for easier servicing. Electric start was first available in 1919. The electrical system’s generator is just visible at the front of the engine.

Matt Anderson is Curator of Transportation at The Henry Ford.

Ford Motor Company, 20th century, 1910s, Model Ts, Henry Ford Museum, Engines Exposed, engines, Driving America, cars, by Matt Anderson